Sump Pump Maintenance Greenville, SC
Sump pumps function in two ways: by removing groundwater from homes on a daily basis, and by evacuating enormous amounts of water during a disaster or emergency.
Top Rated Sump Pump Maintenance
Gravel-filled drains carry groundwater away from your home, where it is diverted to a sump pit and pumped back out to sea. The discharge rate of a high-quality sump pump during an unexpected water event such as a flood can be as high as 4,000 to 5,000 gallons per hour during a flood. Groundwater problems, on the other hand, are significantly more common than flooding. At the absolute least, sump pumps should be serviced once a year. It may, however, require additional attention depending on how it is utilized.
You must disconnect the sump pump’s power source before doing anything with it.
- Some sump pumps require cleaning on a regular basis. If the washing machine water is disposed of by the sump pump, the screen or inlet opening should be cleaned at least once a month. To do so, manually remove a submersible pump from its pit and clean the bottom grate. Because the pump can pull small stones into the grate, cleaning it ensures that the intake isn’t clogged, which can damage the pump.
- Even if it doesn’t handle water from a washing machine, your sump pump could use some TLC every three months. Again, cleaning the pump screen or inlet aperture more than once a year is recommended. It’s also a good idea to check in on it once in a while to make sure it’s still working properly. Make sure it’s connected to a GFCI outlet and that the pump’s cord is in good working order. Check for a tripped GFCI breaker and turn off your sump pump. Pour a bucket of water into the pit to ensure that your pump begins immediately and drains the water rapidly. Check the outlet pipes as well, to make sure they’re tightly connected and draining at least 20 feet away from your house, as well as that the discharge pipe’s vent hole is clear.
- The sump pump and pit must be serviced once each year. You’ll clean them both by removing the pump from the pit. Disconnect the power source after confirming that the cord is in excellent working order and that the connection is secure. Clean the grate, inspect the drainage pipes, clean the screen or inlet opening, and reinstall the pump in the pit with enough water to keep it from drying out.
- You must also keep the sump pump battery backup in good working order. Sump pumps that are powered by electricity are susceptible to power interruptions. Battery backup is a good idea so you don’t get flooded if the power goes out during a storm. The battery’s average life duration and whether or not it is charged by the main power supply should be included in the owner’s handbook. Verify that the battery is charged and, if necessary, replace it. Some sump pumps, however, are water-powered and do not require an electrical source. These pumps, on the other hand, are more suited for backup than primary sump pump application.